2025 Holiday Series #1 | Modern Poinsettia

Hi crafty friends!  Today I am sharing my first official Christmas card of the 2025 season.

The supplies used were:

Gina K. Designs – Modern Poinsettia Stencil Set

    Gina K. Designs – Master Layouts 13 Die Set

    Gina K. Designs – O Christmas Tree Stamp/Die Set

    Gina K. Designs – O Christmas Tree Poly-Glaze Foiling Sheets

    Gina K. Designs – Black Onyx Heavyweight Cardstock

    Scrapbook.com – Mixed Media 6”x8” Paper Pad

    Spellbinders – Poppy Field Color Essentials Cardstock

    Simon Says Stamp – Cranberry Pawsitively Saturated Ink

    Simon Says Stamp – Rhubarb Pawsitively Saturated Ink

    Simon Says Stamp – Sangria Pawsitively Saturated Ink

    Simon Says Stamp – Field Pawsitively Saturated Ink

    Simon Says Stamp – Sprout Pawsitively Saturated Ink

    Altenew – Antique Gold Pigment Ink

    Kid’s Fun Foam (white)

    Nuvo Crystal Drops – Red Berry

    Therm O Web – Gold Deco Foil

    Spellbinders – Fashion Poppy Self-Adhesive Embellishments (half pearls)

    Plastic Palette Knife

    Altenew Enchanted Gold Shimmer Relief Paste

    Altenew Sticky Mat

    Bearly Art Precision Craft Glue

    Misti Original Stamp Positioning Tool

    Heidi Swapp Minc Machine

    Anna Griffin Empress Die Cutting Machine

I started today’s card cutting a piece of 6” x 8” mixed media paper from Scrapbook.com in half so that I have two pieces that measure 3” x 8”.  I will be stenciling down the center of both card panels.

I placed the first 3” x 8” card panel onto my Altenew Sticky Mat and placed the first stencil from the Gina K. Designs “Modern Poinsettia Layering Stencil” set onto the strip of cardstock so that the three center poinsettias line up across the center of the cardstock panel.  I used Simon Says Stamp’s Cranberry (center portions) and Rhubarb (tips of leaves) inks to ink blend the poinsettia leaves from Stencil #1.  For now, I skipped ahead to Stencil #4 and centered it to align with the leaves from Stencil #1 onto the cardstock panels.  I used Altenew “Enchanted Gold” Shimmer Relief Paste and spread it evenly with a plastic palette knife across the openings in the stencil.  I removed the first cardstock panel and repeated the process onto the second cardstock panel.  These two pasted panels must now be set aside to air dry (shouldn’t take more than an hour) – using a heat tool may cause the paste to blister/bubble.

Once the shimmer paste had completely dried, I began ink blending using Stencil #2.  I applied Simon Says Stamp’s Sangria Ink toward the center of the leaves and the Simon Says Stamp Rhubarb ink at the tips.  The final stencil is #3 and I ink blended Simon Says Stamp’s Field and Sprout inks onto these (Sprout at the leaf tips and Field toward the centers).  Once ink blending was completed, I washed all my stencils with some rubbing alcohol and a lint-free cloth before putting them back into their packaging.

From the Gina K. Designs “Master Layouts 13” die set, I used the 1-5/8” x 5” stitched rectangle die and used it to die cut panels from the two poinsettia inked pieces of cardstock.  I cut two panels of Black Onyx card stock using the matting die from Master Layouts 13 that measures approximately 1-3/4” x 5-1/8”.  I adhered the poinsettia panels to the front of the black matting layers and set them aside as I continued building the card. Additionally, I die cut a piece of white cardstock using the stitched die in the set that measured approximately 2” x 3-1/2” and a piece of Black Onyx cardstock from the matting layer die that coordinates with the stitched one.  I adhered this white cardstock panel to the black one and glued it to the front center of my card front, but only applied glue to the left gatefold panel side (you don’t want to glue your card shut!)

My card base will be a gatefold design.  I used my paper trimmer and cut a piece of Spellbinders Poppy Field cardstock to be 8-1/2” x 5-1/2” and then scored the card base at 2-1/8” and 6-3/8”.  I folded the card base along the score lines and reinforced the folds with my bone folder.  Then I adhered each of the black matted, poinsettia panels to the center of each side of the front of the gatefold card base (I find this easier if I put temporary tape on the inside of each gatefold to keep it closed while I work).

Using the Gina K. Designs “O Christmas Tree” Poly-Glaze Foiling Sheets, I trimmed out the Christmas tree design I wanted to use on my card front as well as the “MERRY CHRISTMAS” sentiment and foiled them using Therm O Web’s Gold foil sheets.  Once the poly-glaze tree and sentiment was foiled, I placed the tree into my Misti and used the Gina K. Designs “O Christmas Tree” stamp/die set to stamp the green (Simon Says Stamp Field Ink) portion over my foiled tree trunk/branches as well as the star from the stamp set which I stamped using Altenew’s Antique Gold Pigment Ink and subsequently used the coordinating dies to die cut the tree, sentiment, and star for the card front.   I also cut the tree and star shapes one more time from kid’s fun foam to add dimension and lift when applied to the card front. 

I glued the tree, star, and sentiment die cuts to the white fun foam and glued them to the undecorated, white cardstock panel on the card front.  Lastly, I used Red Berry Nuvo Crystal Drops to change the Christmas tree’s star from gold to red.  I simply felt that small center panel needed a touch of red to tie it to the poinsettias in the background.  For my final touch, I added Spellbinders’ Fashion Poppy Self-Adhesive Embellishments to the tree to represent ornaments.

That completes today’s card!  Thank you so much for stopping by, I hope you enjoyed this fun-fold card that kicks off my Christmas card making season. If you found inspiration and created something similar, please tag me on Instagram @veehatt_inspired - I'd love to see what you create!

Until next time… happy making!

2024 Holiday Series #6 | Sending Holiday Cheer

Hi friends!  For today’s holiday series installment, I decided to do some die cutting with a beautiful snowflake die set from Spellbinders called “Snowflake Card Creator” and an ornament from the Altenew “Lovely Ornaments” stamp and die set.   

The supplies used were:

Spellbinders Silver Treasured Cardstock – Glitter Metallic and Matte Metallic

Spellbinders “Snowflake Card Creator” Die Set

Altenew “Lovely Ornaments” Stamp and Die Set

Spellbinders “Festive Ornaments” Die Set (ornament topper)

Spellbinders / Simon Hurley 3D Embossing Folder “Sparkling Snow”

Simon Says Stamp “Christmas Wishes” Sentiment Strip

Pinkfresh Studios Navy Glitter Cardstock

Spellbinders Indigo Cardstock

Spellbinders Glimmer Foil – Silver

Nuvo Crystal Drops “Liquid Mercury”

Taylored Expressions Anti-Static Powder Tool

DMC Silver Diamant Thread

Simon Says Stamp Clear Embossing Ink

Brutus Monroe “Sterling” Embossing Powder

Heidi Swapp Mini Minc Machine (for foiling)

Wagner Heat Embossing Tool

Misti Original Stamp Positioning Tool

Anna Griffin Empress Die Cutting Machine

I started today’s card by cutting a piece of Spellbinders Indigo cardstock to measure 5”x5” and cut a piece of Spellbinders Glitter Metallic cardstock from the Treasured Cardstock collection to measure 5-1/4” x 5-1/4”.  These two pieces will be used as my card front’s background.

Using the Spellbinders/Simon Hurley “Sparkling Snow” 3D Embossing Folder, I misted the 5”x5” Indigo cardstock with a little bit of water and placed it into the embossing folder and ran it through my Empress die cutting machine.  I removed the cardstock from the embossing folder and, once dry, I used tape runner to adhere the 3D embossed cardstock to the front of the Silver Glitter Metallic cardstock.

I created two snowflake die cuts using the large snowflake die from Spellbinders’ “Snowflake Card Creator” die set – one was cut from a previously splattered silver and white background piece of cardstock and the other was cut from Spellbinders Matte Silver cardstock from the Treasured Cardstock collection.  I placed liquid adhesive to the back side of the splattered cardstock snowflake and adhered it to the center of the embossed, indigo cardstock then placed liquid glue to the back of the matte silver metallic snowflake diecut and adhered it to the top of the last snowflake but twisted its orientation so they would be offset from one another. I carefully trimmed off any of the snowflake pieces that extended beyond my card front.

Next for the ornament.  I used my Misti and Altenew’s “Lovely Ornaments” stamp and die set and placed the stamp that looks like streamers on top of a scrap piece of gold matte cardstock and picked it up with my Misti door.  I inked the stamp with Simon Says Stamp’s clear embossing ink, applied a generous amount of anti-static powder to my cardstock, and stamped the impression onto the gold cardstock panel.  I used Brutus Monroe’s “Sterling” embossing powder and applied it to the embossing ink, tapped off the excess, and heat set it with my heat tool.  After the cardstock cooled, I used the circle die from the “Lovely Ornaments” die set to cut the gold, silver embossed cardstock with my die cutting machine.  Then I used a die from the “Lovely Ornaments” set that looked almost like dripping icing and die cut it from a piece of Pinkfresh Studios’ navy glitter cardstock.  I adhered the navy glitter die cut to the top of the gold ornament base using liquid glue.  I took a piece of silver DMC Diamant thread and tied it into a double bow (leave the tails long) and set that aside for the moment.  For the ornament topper, I wanted one that was more substantial than what came with the “Lovely Ornaments” die set, so I used the Spellbinders/Nichol Spohr “Festive Ornaments” dies and selected the two ornament topper pieces and cut the one with the base out of a scrap of silver metallic cardstock and the one with the hanger loop from some gold metallic cardstock.  I glued the metallic silver die cut on top of the metallic gold ornament topper die cut and held those two together with my reverse tweezers until they dried.  Once dried, I adhered the new ornament topper to the top of the navy/gold ornament and glued the silver thread bow to the top of the ornament hanger with liquid glue.  While the glue was drying on the bow, I decided to add some more texture to the ornament by adding Nuvo Crystal Drops “Liquid Mercury” to each of the little dots created with the embossing of the lower half of the ornament and set the ornament aside until all components were dry.

I selected the “Sending holiday cheer” sentiment from the Simon Says Stamp’s “Christmas Wishes” sentiment strips and used silver Spellbinders Glimmer Foil to add a metallic shine to the toner sentiment strip.  Once foiled, I added small, thin foam squares to the back of the sentiment strip.

I added thin foam squares to the back of the now dry ornament and adhered it to the center of my card front.  I removed the release paper from the foam squares on the back of my sentiment strip and adhered it to the lower center of the card front and that completed today’s card.

I hope you enjoyed the card and found inspiration for some of your own holiday projects!  Until next time… happy making!

2024 Holiday Series #5 | Let It Snow

Hi friends!  For today’s holiday series installment, I created a Copic-colored snowman cutie from AALL & Create’s “Snow Good” stamp set.   This project can also be found on my YouTube channel so you can watch the step-by-step construction process at https://www.youtube.com/@VeehattInspired .

The supplies used were:

X-Press It Blending Cardstock

AALL & Create “Snow Good” Stamp Set

Copic Alcohol Markers (colors listed below)

Spellbinders “Perfect Touch Rectangles and Tag” Die Set

Snowflake Pattern Cardstock (from an older Simon Says Stamp card kit)

Memory Box Open Studio “Holiday Wishes” Stamp Set

Simon Says Stamp Intense Black Ink Pad

  Gelly Roll Glaze Pen - Black

Gelly Roll White Pen

Gelly Roll Glitter Pen #705 

Scrapbook.com 1” 1mm Foam Adhesive Roll

Ranger Heat It Craft Tool

Misti Original Stamp Positioning Tool

Anna Griffin Empress Die Cutting Machine

To begin the card, I used the largest die from Spellbinders’ “Perfect Touch Rectangles and Tag” die set and die cut a piece of X-Press It Blending Cardstock to serve as the base of my card front.  I chose this cardstock for the base so it will match the same tone of white I used for the decorative cardstock that I used for the Copic coloring.  I added adhesive to the back of this card panel and adhered it to my side-opening, A2 card base.

Next, I pulled a piece of snowflake pattern paper that I had in my stash that was included in a winter-themed card kit that I had purchased from Simon Says Stamp – but any snowy pattern paper or even stamped or embossed would work fine.  I trimmed the pattern paper to be 2” x 5-1/2” and adhered it to the left side of my card front.  I have some spools of thin, glittered washi tape that I bought a couple years ago from Amazon – I think they were intended for people to use on their fingernails, but of course we crafters see beyond the intended use!  I used the gold glittered roll of washi tape and ran a strip of it down the edge of the patterned cardstock on my card front.

I used the fifth largest die from the Spellbinders’ “Perfect Touch Rectangles and Tag” die set and die cut a piece of X-Press It Blending Cardstock… this will be the panel that I stamp and color with the Copics.

Using the Misti stamp positioner and Simon Says Stamp’s Intense Black ink, I stamped the snowman from AALL & Create’s “Snow Good” stamp set and the “Let It Snow” stamp from Memory Box’s “Holiday Wishes” stamp set onto the small X-Press It cardstock rectangle.  I heat set the ink to ensure it wouldn’t bleed when I began the Copic coloring.

For the Copic coloring:

    Stick arms – E25, E27

    Carrot nose – YR16, YR18, E08

    Eye – B15, B000, White Gel Pen

    Sock Hat & Scarf – RV02, RV13, RV14 and BG07, BG15, BG32, Gelly Roll #705

    Body – B000, B00

Once the coloring was completed, I added two strips of Scrapbook.com’s 1” 1mm foam adhesive to the back of the colored panel and adhered it to the center of the card front.  My final touch was to add black Gelly Roll Glaze pen details to the snowman’s eyes and buttons and some random white Gelly Roll accents on the snowman’s hat and scarf.

I hope you enjoyed the card and found inspiration for some of your own holiday projects!  Until next time… happy making!