Halloween | Hero Arts + Tim Holtz

Hi friends!  Today’s project is a fun Halloween card using the Hero Arts Beep Beep die set and some spooky characters from the Tim Holtz/Idea-ology Halloween Paper Dolls package.  Let’s get started!

The supplies used:

     Hero Arts – Beep Beep Die Set

     Sizzix/Tim Holtz – Moonlight Die Set

     Sizzix/Tim Holtz – Haunted House Die Set

     Waffle Flower – A6 Layers Die Set

     Trinity Stamps – October Night Sky Stencil Set

     Lawn Fawn – Hocus Purr-cus! Stamp Set

     Tim Holtz/Idea-ology – Halloween Paper Dolls

     Altenew – Cosmic Berry Cardstock

     Spellbinders – Royal Amethyst Cardstock

     Spellbinders – Raven Cardstock

     Spellbinders – Fog Cardstock

     Spellbinders – Sage Cardstock

     Impression Obsession – Bats for Halloween 6”x6” Paper Pack

     Altenew – Black Diamond Glitter Cardstock

     Gina K. Designs – Magic Masking Sheets

Ranger – Spun Sugar, Twisted Citron, Picked Raspberry, Dusty Concord Distress Crayons

     Altenew – Grape Agate, Teal Tempest, Jet Black Fresh Dye Inks

     Ranger/Tim Holtz – Bundled Sage, Shabby Shutters, Forest Moss Distress Inks

     Ranger/Tim Holtz – Old Paper Distress Oxide Ink

     Hero Arts – Unicorn Pigment Ink

     Tsukineko - VersaFine Clair Nocturne Pigment Ink

     Altenew – Mini Blending Brushes

     Idea-ology/Tim Holtz – Distress Crayons:  Spun Sugar, Dusty Concord,

          Twisted Citron, Picked Raspberry

     Copic Sketch Alcohol Marker C4, Cool Grey No. 4

     Picket Fence Studios – Liquid Silver Locket Paper Splatter Watercolor

     Ranger Ink – Glossy Accents

     Altenew – 1” Black Double-Sided Adhesive Tape

     Scrapbook Adhesives – Black Thin 3D Foam Squares

     My Sweet Petunia – Original MISTI Stamping Tool

     Anna Griffin Empress Die Cutting Machine

Creating the Background Panel

I started the development of the background panel, by die cutting the smallest moon die outline and the smaller moon full die from the Sizzix/Tim Holtz Moonlight die set from a Gina K. Designs Magic Masking Sheet (for the full moon with detail die – keep the outside the moon scrap piece as well as the actual moon).  I die cut a piece of Spellbinders Sage cardstock using the second largest die from the Waffle Flower A6 Layers die set and die cut Spellbinders Raven cardstock using the largest die in this set.  I used a blending brush and inked the entire Sage panel using Distress Bundled Sage ink to give a darker tone than the Sage was presenting.  Once the ink dried, I added the moon mask that I die cut to the top center of the card so that the moon mask was only about 3/4” onto the card panel.  Next, I ink blended approximately an inch of Shabby Shutters Distress Ink around the edge of the moon.  I ink blended Forest Moss Distress Ink beginning at the edge of Shabby Shutters and continued the ink blending until the ink was blended about three fourths of the way down the cardstock panel.  For the bottom quarter of the ink blending, I used a very heavy layer of Altenew Teal Tempest Fresh Dye Ink since I was trying to come up with something more along the lines of a phthalo green and I didn’t own an ink color in that shade of green, then finished out the ink blending with Altenew Jet Black on the bottom edge.

Now back to the moon… I placed the “outside the moon” Masking Magic moon mask to protect the card’s background to mask off the moon.  I added a layer of Distress Old Paper Oxide Ink to serve as the surface of the moon.  Once the ink dried, I removed the outside the moon mask and added the mask that has the moon with the holes in it and inked the apertures with Distress Bundled Sage Ink.  Using the Trinity Stamps October Night Sky Stencil set, I used the stencil with the wispy clouds and inked them onto the upper portion of the background using Hero Arts Unicorn pigment ink and spattered the background with Picket Fence Liquid Silver Locket Paper Spatter and a small paint brush.  Alas, I could now set the background panel aside to fully dry.

Creating the Focal Point

Using the Hero Arts Beep Beep die set, I die cut the car twice from Spellbinders Purple Amethyst cardstock and glued the two car die cuts together, then partially cut it a third time from a patterned cardstock in the Impression Obsession “Bats for Halloween” paper pack so I could get the windshield negative piece to adhere behind the occupants of the vehicle.  Next, I used an Altenew Mini Blending Brush along with Altenew’s Grape Agate ink to add shading to the car die cut where I felt shading should be.  I die cut the other vehicle dies from these cardstocks:

     Side Mirrors, Metal Rings Around Lights, Front Bumper:  Brushed Silver Cardstock

     Tires:  Spellbinders Raven Cardstock

     Steering Wheel, License Plate:  Spellbinders Fog Cardstock

     Lights:  Spellbinders Sage Cardstock

Once the die cutting was completed, I glued all the car die cuts (except the license plate and negative, windshield piece) to their appropriate location onto the ink blended car die cut. 

After digging through the many options in the package of Tim Holtz/Idea-ology Halloween Paper Dolls package, I selected two of the paper dolls that made me giggle the most, positioned them behind the front window of the car, trimmed any excess that exceeded the edge of the car, and gave them a bit of color using Tim Holtz Distress Crayons before gluing them into place.  If you would like to use the same colors, I used:

     Cheeks:  Spun Sugar

     Dress:  Twisted Citron

     Suit Coat:  Picked Raspberry

     Suit Vest:  Dusty Concord

Of course, you don’t need to add color to the paper dolls, but I thought it added to the creepiness.  Once the people were glued behind the open windshield, I added the patterned paper windshield die cut and glued it in place behind the paper doll characters.  Next, I used a C4 Copic marker to add some dots to the steering wheel to give it some more interest and added Ranger’s Glossy Accents to the headlights and turn indicator lights then set the car aside to allow the Glossy Accents to dry.

Creating the Sentiment

For the sentiment, I placed the license plate die cut that was created using Fog cardstock during the Creating the Focal Point into my MISTI stamp positioner and used the HALLOWEEN sentiment from Lawn Fawn’s Hocus Purr-cus! stamp set along with VersaFine Clair Nocturne ink to stamp the word onto the center of the license plate die cut.  Once the ink dried, I went around the edges of the Fog-colored license place with a black marker so it would stand out better against the brushed silver car bumper.

Assembling the Card

I added Altenew’s black Instant Dimension Foam Tape to the back side of the car of characters and adhered it to the lower front of the card’s background.  For the bats, I used the Sizzix/Tim Holtz Haunted House die set and Altenew’s Black Diamond Glitter Cardstock and die cut the little bat dies and used liquid glue to adhere them to the night sky.  I adhered the license plate onto the car’s bumper using black Instant Dimension Foam Tape.

Thank you for stopping by and checking out today’s blog post, I really appreciate it.  Until next time, happy crafting!

2025 Holiday Card Series #8 | Merry Little Things

Hi crafty friends!  Today I am sharing another tag that could also be made into a card featuring some humorous and delightful stamps from AALL & Create.  This company makes some of the most adorable, whimsical stamps that I’ve ever had the opportunity to work with.   I put my fate once again in the Sarah Renae Clark’s Color Cubes and a random number generator to pick my color scheme and today Color Cube card was #641.  Again, this one didn’t yell Christmas in the traditional sense, but I think we can make it work.

The supplies used:

AALL & Create – Hexalove Die Set

AALL & Create – The North Pole Stamp Set

AALL & Create – Merry Little Things Stamp Set

AALL & Create – Lil Elf Stamp Set

Technique Junkies – Birch Tree Border

X-Press It Blending Cardstock

Simon Says Stamp – So Very Black Cardstock

Copic Alcohol Markers – E04, E11, E00, E19, E15, E13, RV34, RV63, RV52, RV17, RV14, RV13, RV11, V17, V15, V12, BG78, BG72, BG11, N3, N1, N0

Ranger/Tim Holtz – Distress Oxide Ink Pads – Spun Sugar, Kitsch Flamingo

Lawn Fawn – Jet Black Premium Ink Pad

Sakura Gelly Roll Metallic Gold

Sakura Gelly Roll White 10

Scrapbook Adhesives Thin 3D Foam Squares

Bearly Art Precision Craft Glue

Winsor & Newton White Designers Gouache

Krylon Workable Fixatif Spray

Anna Griffin Empress Die Cutting Machine

Creating the Card Front Background

I cut a piece of white cardstock to measure 4” x 6-1/2” to give me plenty of space for ink blending and to allow room to use the AALL & Create Hexalove die to cut the card front.  Next, I used the inner tag die from the Hexalove die set, placed it on the white cardstock, and traced loosely around it with a pencil to show me where my actual cutting boundaries will be when I place the tree background stamp and do the ink blending for the background.  After that, I used the Technique Junkies Birch Tree Border stamp and stamped it on the left end of the tag using Copic friendly ink and stamped it a second time onto Altenew Masking Paper.  I fussy cut the image that I stamped onto the masking paper and used Copic markers N3, N1, and N0 to color the tree image stamped onto the white cardstock.  Once the alcohol marker ink dried, I peeled the backing from the masking paper tree image and placed it over the Copic-colored one on the cardstock.

For the sky, I used Distress Oxide inks in the colors Kitsch Flamingo and Sun Sugar.  I started ink blending at the top of the cardstock using Kitsch Flamingo and blended toward the bottom with the Spun Sugar.  Once the ink had a chance to dry, I die cut the ink blended cardstock panel with the tag front die from the Hexalove die set.  To set the colors and help them to not bleed when I spatter with white gouache, I went outside and lightly sprayed the inky tag panel using Krylon Workable Fixatif spray (you want to do this outside with lots of air flow!).  The Fixatif spray will also add a satin sheen to the cardstock versus the chalky finish you would get with the Distress Oxide inks… just in case you were wondering.  I allowed the Fixatif coating to completely dry then mixed a couple drops of water with some Winsor & Newton white gouache and spattered it across the tag background. 

I die cut a piece of Simon Says Stamp So Very Black cardstock using the decorative tag die in the Hexalove die set to frame the tag front.  I glued the inked front panel to the decorative tag panel and set aside to dry.

Creating the Focal Point

My focal point for this card was the elf from the AALL & Create The North Pole stamp set, the present from ALL & Create’s Lil Elf stamp set, and a tree from AALL & Create’s Merry Little Things stamp set.   I’ll list the Copic markers used for each element below:

     Elf Skin:  E04, E11, E00

     Elf Eyes:   E15, E13

     Elf Clothing:  BF78, BG72, BG11 (Teal)

         RV17, RV14, RV13, RV11 (Pink)

         V17, V15, V12 (Purple)

         Buttons and Bell – Sakura Gelly Roll Metallic Gold

     Tree Trunks:  E19, E15, E13

     Tree Flower Petals:  RV34, RV63, RV52 (Pink)

     Tree Flower Centers:  E19, E15, E13

     Tree Body:  BF78, BG72, BG11 (Teal)

         RV34, RV63, RV52 (Flower Petals)

         E15, E13 (Flower Centers)

     Present:  V17, V15, V12, E19, E15, E13

     Star on Tree:  Sakura Gold Metallic Gelly Roll

Once the coloring was completed, I added some white highlights here and there to the images just for fun and added interest using a white, size 10 Gelly Roll pen.  Once the white highlights dried, I fussy cut the images and added foam squares to the backs for adhering to the tag front later in the process.

Building the Sentiment

Utilizing the “merry little things” sentiment from AALL & Create’s Merry Little Things stamp set, I stamped the sentiment onto the tag’s background using Altenew Obsidian Pigment Ink. 

Finishing the Design

To complete the card, I removed the backing paper from the adhesive squares on all the elements and adhered them to the card front.  Using a ¼” hole punch, I punched a hole at the top of the tag so it could be placed on a gift more easily.  My final touch was to add a bit of mauve and white ribbon to the top to finish off the festive design and then sprinkled some glitter at the center of the bow. 

Thank you for stopping by and checking out today’s blog post, I really appreciate it.  Until next time, happy crafting!

2025 Holiday Card Series #7 | Cutest Reindeer of All

Hi crafty friends!  Today I am sharing a tag that could also be made into a card featuring some humorous and delightful stamps from AALL & Create.  This company makes some of the most adorable, whimsical stamps that I’ve ever had the opportunity to work with.   I went out on a ledge with a random number generator to pick the color scheme from Sarah Renae Clark’s Color Cubes for this tag and the winner was #4.  Not exactly screaming Christmas, but let’s see if we can make it work!

The supplies used:

AALL & Create – Hexalove Die Set

     AALL & Create – Merry Little Things Stamp Set

     AALL & Create – Snow Good Stamp Set

     X-Press It Blending Cardstock

     Spellbinders – Antique Glitter Metallic Cardstock

     Lawn Fawn – Jet Black Premium Ink Pad

     Ranger/Tim Holtz – Distress Oxide Ink Pads – Uncharted Mariner,

          Peacock Feathers, Salvaged Patina

     Copic Alcohol Markers – BG78, BG49, BG45, BG72, BG11, YG0000

          YG63, YG61, YG11, E53, E51, E50, E19, E08, E97, YR18, YR12, YR82

     Winsor & Newton White Designers Gouache

     Trinity Stamps – Crystal Ball and High Dive Baubles

     Krylon Workable Fixatif Spray

     Bearly Art Precision Craft Glue

     Scrapbook Adhesives Thin 3D Foam Squares

     Anna Griffin Empress Die Cutting Machine

Creating the Card Front Background

I cut a piece of white cardstock to measure 4” x 6-1/2” to give me plenty of space for ink blending and to allow room to use the AALL & Create Hexalove die to cut the card front.  Next, I used the inner tag die from the Hexalove die set and used it to cut a 2” x 3” piece of the Spellbinders Antique Glitter Metallic cardstock so that the edges of the glitter cardstock align perfectly with the tag. I used my scissors to simply freehand a curvy edge on the top end of the glitter cardstock to represent a slight hill. 

For the wintry sky, I used Ranger/Tim Holtz Distress Oxide inks in the colors Uncharted Mariner, Peacock Feathers, and Salvaged Patina.  I started ink blending at the top of the cardstock using Uncharted Mariner, then moved to Peacock Feathers, and lastly Salvaged Patina.  I worked my way up and down the cardstock, changing ink colors as necessary, until I obtained the look I was going for.  Once the ink had a chance to dry, I die cut the ink blended cardstock panel with the tag front die from the Hexalove die set.  To set the colors and help them to not bleed when I spatter with white paint, I went outside and lightly sprayed the inky tag panel using Krylon Workable Fixatif spray (you want to do this outside with lots of air flow!).  The Fixatif spray will also add a satin sheen to the cardstock versus the chalky finish you would get with the Distress Oxide inks… just in case you were wondering.  I allowed the Fixatif coating to completely dry then mixed a couple drops of water with some Winsor & Newton white gouache and spattered it across the tag background.  Once the spatter dried, I glued the metallic glitter cardstock panel to the bottom of the tag.

Using a piece of black cardstock from my scrap bin, I die cut the decorative tag die in the Hexalove die set to frame the inky background.  I glued the inked front panel to the decorative tag panel and set aside to dry.

Creating the Focal Point

My focal point for this card was the reindeer from AALL & Create’s Snow Good stamp set and the stack of three presents and one of the trees from AALL & Create’s Merry Little Things stamp set.   I’ll list the Copic markers used for each element below:

     Reindeer:  E19, E08, E97

     Reindeer Coat:  BG49, BG45 w/ E19 pocket, & Gold Posca buttons

     Reindeer Scarf:  YG63, YG61, YG11

     Reindeer Antlers:  E53, E51, E50

     Christmas Tree:  YG63, YG61, YG11, YG0000

     Tree Trunk:  E19, E08

     Star on Tree:  Sakura Gold Metallic Gelly Roll Pen

     Christmas Gifts:  BF78, BF72, BG11 (blue)

                                YR18, YR12, YR82 (orange)

                                 BG78, BG49, BG45 (dark blue)

Once the coloring was completed, I fussy cut the images and used liquid glue to adhere four Trinity Stamps “High Dive Baubles” and four Trinity Stamps “Crystal Ball Baubles” to the Christmas tree in the place of ornaments.  When the glue dried, I added foam squares to the back of all the colored elements.

Building the Sentiment

Utilizing the small rectangular die from the Hexalove die set, I diecut a banner to hold the sentiment out of a scrap of white cardstock that I colored with Copic markers E08, E97, YR12, and E51.  Then from the AALL & Create Snow Good stamp set I stamped the sentiment that said “cutest reindeer of all” onto the rectangle die cut.  I loved the quirky, smudged look of this stamp and couldn’t resist using it as my sentiment.  Lastly, I added some foam squares to the back of the sentiment.

Finishing the Design

To complete the card, I removed the backing paper from the adhesive squares on all the Copic colored elements and adhered them to the card front.  Using a ¼” hole punch, I punched a hole at the top of the tag so it could be placed on a gift more easily.  My final touch was to add a bit of silver cord and white ribbon to the top to finish off the festive design. 

Thank you for stopping by and checking out today’s blog post, I really appreciate it.  Until next time, happy crafting!